- Strong Robust Stainless Steel
- Tasty Chlorine Free Water
- Anyone Can Setup & Use
- 10 Year Warranty Against Rust
- Lifetime Guarantee Against Faulty Workmanship
The Filteroo® Superoo Stainless Steel Gravity Water Filter is a robust and durable filtration system that produces high-quality water by utilizing top-tier cartridges included with the filter. By integrating some of the finest gravity water filtration cartridges available globally with premium 304-grade stainless steel, this system effectively generates healthy and palatable water. The use of stainless steel is an excellent choice for purifying and storing water prior to consumption. Whether your water source is rainwater collected in a tank or chemically treated tap water, this filter is designed to purify your water, supported by test results that validate its effectiveness.
The filtration process employed by Filteroo® is a gentle and gradual gravity method that guarantees adequate contact time between the water and the filter media, ensuring thorough removal of unwanted contaminants.
Water produced by the Filteroo® Superoo gravity water filter is free from harmful contaminants while retaining beneficial minerals, making it suitable for consumption. Regardless of your location, the Filteroo® Superoo will effectively purify your water, preserving healthy minerals and delivering a clean, filtered, and refreshing taste.
The Filtration is Your Choice:
These Superoo gravity water filters are packed as standard with 2 x carbon block cartridges, OR, you can add an extra 2 x Fluoride reduction cartridges to attach onto the bottom of the carbon block cartridges to reduce the fluoride. This method of filtration filters water faster than the ceramic drip by drip fluoride reduction cartridges.
Filteroo® Superoo has the Filteroo® Rain & City Water Filtration Gravity Carbon Block Cartridge, which is most common for rainwater and those people who do not want to remove fluoride from town or treated city water.
The Filteroo® MAX fluoride removal cartridges are designed to effectively remove fluoride from drinking water. By allowing water to flow slowly through the cartridge, it ensures maximum contact time with the media, which enhances fluoride removal. These cartridges, made by Omnipure in the USA, are easy to attach to the thread of your Filteroo® rain & city water gravity carbon block cartridge and hang inside the bottom tank of your Filteroo® Steel gravity water filter.
Test Results
-
Removes over >90% of fluoride
-
Arsenic
-
Some heavy metals
-
Polishes up water to be tasty
Lifespan
Each Filteroo® MAX fluoride removal cartridge lasts for 2000 litres. So if you have 2 x cartridges installed into your Filteroo® Steel gravity water filter you have 4000 litres of use. 2 cartridges will provide 10 plus litres every day of the year. We recommend you replace each cartridge after 2000 litres or every 12 months which ever comes first.
How to install Max fluoride removal cartridge:
1. Remove the plastic wrapping whilst keeping the cartridge clean. (Wash the cartridge outside if required before removing the thread end caps)
2. Remove the end caps from each end of the cartridge.
3. Sit the rubber flushing washer over the hole on 1 end of the cartridge. Hold the cartridge and washer as you press it up against the tap spout to get a good seal. Gently turn on the cold water and allow the water to flow into the cartridge & then out the other end to flush the fine particles out of the cartridge. Flush continuously for 1 minute.
4. Turn the cartridge around and repeat above. Flush for a further 1 minute & ensure that the water flows clear. Repeat this process for all the Filteroo® MAX fluoride removal cartridges you intend to install.
5. Once the cartridge is flushed, lift the top tank off your Filteroo® Steel bottom tank & sit the top tank upside down on the bench top. The Filteroo® MAX Fluoride Removal cartridge screws directly onto the exposed carbon cartridge threaded stem already installed. (Note - Only 1 end of the cartridge has a thread). The cartridge MUST be installed by the threaded end. Screw on the cartridge gently ensuring you do not cross the thread. Tighten until firm. Do not over tighten.
6. Once the Filteroo® MAX fluoride removal cartridges have been installed, place the top tank back onto the bottom tank. The fluoride cartridges hang down inside the bottom tank. Now fill the top tank with water and allow that water to filter down through both the Filteroo® carbon cartridge & the Filteroo® MAX fluoride removal cartridges.
7. Once the top tank water has emptied into the bottom tank. Discharge that water to waste or onto the garden.
When not used
If the filter is left to stand for more than 3 - 4 days without use, it is recommended that one litre of water be allowed to flow through the cartridge to waste before using.
Highly recommended for rainwater & city water supplies treated with chlorine or chloramine. If your water is treated with or contains Fluoride, you might want to check out the option which will remove the fluoride, and utilise the Filteroo® Max fluoride removal cartridge that connects directly onto the bottom of the carbon cartridge.
NEVER WASH CARTRIDGES WITH DETERGENTS OR SECOND-HAND SCOURER PADS.