Introducing the superior next generation for our SCP Fluoride Plus™ filter. Effectively remove fluoride and a wide array of other contaminants, this filter ensures your drinking water is safe and free from harmful substances.
The Ultra Fluoride Filter, stands 146mm high (5 3/4 inch) while as the current ultra fluoride candle marketed in Australia, which is 178mm tall and too large for most gravity systems, this filter is designed to fit perfectly. The Ultra Fluoride filter is specially manufactured by Doulton for Southern Cross Pottery distribution.
The advantages of the Ultra Fluoride Filter:
Rigorously Tested: Proven to remove up to 98.9% of fluoride, absorbing a total of 1600 ppm. For water with 1 ppm of fluoride, the filter effectively purifies 1600 litres before replacement. With fluoride levels below 1 ppm, it can purify even more. Australia's municipal fluoride average ranges from 0.6 to 1.1 ppm.
Broad Spectrum Contaminant Removal: Eliminates up to 99.99% of common contaminants, including fluoride, bacteria, chlorine, parasites, microplastics, trace organics, enhanced organics, pharmaceuticals, arsenic, and heavy metals like lead.
Natural Raw Materials: Made from 100% naturally occurring raw materials, these vegan-friendly filters contain no activated alumina or bone ash.
Taste Preservation: Maintains essential minerals like calcium, magnesium, and potassium, enhancing water taste and slightly increasing alkalinity for a healthier pH balance.
Replacement Intervals: For optimal performance, replace the ultra fluoride filter every 1600 litres or every 6 to 9 months, whichever comes first. To ensure continuous contaminant removal, it is highly recommended to replace the filter every 6 months.
Other Key Points:
- Ideal for use with municipal town water, tank water, and bore water.
- Flow rate under gravity is approximately 1.2 litres per hour.
- Absolute filtration down to 0.9 microns.
- Manufactured by Fairey Industrial Ceramic Laboratory (Doulton) in England.
- No need to sterilise or boil water, as the Doulton® proprietary system inhibits microbiological growth.
- The small amount of plastic used in the candle frame is BPA-free.
- Each ultra fluoride candle has a unique 10-digit code on the filter frame, guaranteeing authenticity.
Ultra Fluoride FAQ
Is British Berkefeld (Doulton) Ultra Fluoride Filter the same as SCP Fluoride Plus?
The Ultra Fluoride Filter is the superior next generation for our SCP Fluoride Plus™ filter. It has
been engineered to effectively remove everything the SCP Fluoride Plus™ filter removes PLUS
98.9% of fluoride, with an absolute filtration down to 0.9 microns it is literally the finest filter on
the planet. The Ultra Fluoride Filter is 146mm high and has been specially manufactured by
Doulton for Southern Cross Pottery distribution.
British Berkefeld and Doulton: Are they the same?
Yes! The following FAQs apply to both British Berkefeld and Doulton.
Who owns British Berkefeld and Doulton?
Both brands are owned by Fairey Industries and manufactured in England.
Why are some products marketed under different names?
They have a rich history in producing water purifying systems. Products are marketed under
either name for historical reasons.
What is the British Berkefeld Water Filter Journey?
- Named after Wilhem Berkefeld, a German engineer.
- Developed gravity-fed water filters using Kieselguhr (diatomaceous earth).
- Crucial role in combating water-borne diseases (Hamburg's cholera outbreak).
What is the history of the Doulton brand?
- Manufactured in the UK for over 185 years.
- Filters developed by Henry Doulton to combat cholera and other water-borne diseases.
- Acquired Portacel’s domestic water filter business and the trademarks Berkefeld and Sterasyl
in 1985.
- Fairey Industrial Ceramics Limited (FICL) manufactures all Doulton® and British Berkefeld® ceramic drinking water filters in North Staffordshire, UK.
Why is it important to remove fluoride?
The Ultra Fluoride Filter effectively removes fluoride, addressing concerns related to dental
fluorosis, skeletal health, neurological effects, and water taste.
How long does the Ultra Fluoride filter last?
Replace every 1600 litres or 6-9 months, ideally every 6 months for optimal performance.
How effective is the filter at removing fluoride over time?
Maintains high 90s percent removal efficiency throughout the filter's life.
Does the Doulton filter retain beneficial minerals?
Filters remove sedimentary minerals but retain beneficial ionic minerals such as magnesium,
calcium, sodium, potassium, and manganese.
Why do Total Dissolved Solids increase with a Doulton filter?
Healthy mineral content increase may lead to a slight rise in Total Dissolved Solids.
Why does the pH level of my water increase with a Doulton filter?
Healthy mineral content increase may lead to a slight rise in water pH level.
Do Doulton filters work with hard water?
Ceramic filters do not soften or decalcify water, preserving beneficial minerals.
Are Doulton and British Berkefeld filters BPA-free?
Yes, all Doulton and British Berkefeld filters are made from BPA-free, food-grade polypropylene.
How do I clean a ceramic filter candle?
Buff gently with a scouring pad until the ceramic returns to its original whiteness. Do not use
soap or detergents.
How do I know when my ceramic filter element needs cleaning or replacing?
Clean when water flow decreases, or the filter becomes discoloured. We recommend cleaning
every 3 months and replacing every 6-9 months.
Why is my ceramic filter element discoloured?
Indicates effective sediment filtration. We recommend cleaning filters regularly to prevent
sediment build-up and maintain flow rate.
Can I recycle my old ceramic filter?
Break ceramic shell and use in garden pots or soil; recycle the plastic frame.
Is it normal to have a little water left in the upper chamber?
Yes, it is normal to have some water left due to gravity filtration mechanics.
How should I store my system/filters before going on vacation?
Dry ceramic filters upside down on a dish rack with the lid off.
Why is there sometimes a metallic taste when the filter is brand new?
Initial chemical reaction with carbon; safe to drink and dissipates in a few days.
Why are there carbon flecks in the bottom of the water purifier?
Normal in new filters, harmless carbon bits.
Why is the water not flowing quickly?
Pre-soak new filters in a large glass of water to eliminate air pockets and improve flow rate. It is advisable to pre-soak the filter so that you acquire a good flow of water from the very beginning, this process removes any air in the filter. Place the filter upside down in a pot of water overnight with the white ceramic submerged and the thread exposed to the air, in the morning remove from water and shake up and down vigorously for about 30 seconds holding on to the plastic frame as you do this. To install: place the candle mount stem through the hole in the upper chamber of the filter housing, secure from underneath with the washer and wing nut supplied - DO NOT OVERTIGHTEN the wing nut as that might reduce the flow. Initially you should get a flow of about 700 ml per hour which will increase over time. The ultra fluoride filters down to 0.2 of a micron (far more than any other competing gravity filters) and might initially be slower than previous filters you have used BUT it is removing far more impurities.